Inflatable Boat (Inflatable Dinghy) 3.5 meter RIB, Fiberglass or Aluminum Bottom
Length : 350 cm (3.5m)
Width : 170 cm (1.7m)
Tube Diameter : 45cm
Tube Material : High grade abrasion resistant PVC (0.9mm) or Special Hypalon with extra charge
Air Chambers : 3
Capacity of persons : 4.5 persons (Meaning 4 adults and one child)
Maximum power capacity : 15 hp (Engine is not inlcuded)
Accessories included : 2 x Marine Aluminum Oars, Rope line, Marine plywood seat floor, (Front locker optional), Repair kit, foot pump.
Price : HKD 25,000 (including delivery to our customers in Hong Kong)
Remarks : For all our Rigid Inflatable boats (RIBs) we have option of having Fiberglass or Aluminum bottom and floors. Our Inflatable boats also called sometimes as rubber boats are made of PVC material which is 0.9mm thick. This thickness is considered very thick and with the special high grade PVC we use the inflatable boats are very resistant to abrasion and scratches from sharp objects. A customer can also choose Hypalon boats for the same model with added extra cost. We import the Hypalon material from Japan or France to ensure its quality and safety. Hypalon material is generally considered to be stronger and are also suitable for extreme hot climate. Having said that, we have been selling these dinghys for over 13 years in Hong Kong, Asia & Australia. So far we did not have any complains and if given minimal care and maintenance these rubber boats can last for ever. We would also point of quite proudly that we are not the cheapest and after years of experience in selling inflatable boats we found some of the cheaper boats that were dangerously compromised for their quality. It is of most important that the users of our boats are safe in the waters. Even in the event of a tear or accident, the boat should be made enough separate air chambers to be able to take the people back to safe grounds. It is also surprising how many manufacturers have no idea what they are doing and completely ignore common sense to save costs. However, our factory and we have been working together for 15 years in designing and improving our inflatable boats. The smallest parts are checked and made for functionality. If it is a small front locker or a small rope tied around. It is made while taking in account the things people need and the way they operate when on a small boat.
Our boats are also have Double fiberglass hulls, which is a Bottom V shape hull and an additional flat floor. After having cases of people twisting their ankles while getting on the boat, we had completely stopped selling the boat without the floor. Our design makes the boat heavier and slightly more expensive but again safety and sensibility is not something that we will compromise. Our factory also makes the boats for some very famous western brands which hike up the prices greatly for the same product. However, our aim is to provide a safe dinghy or boaters at a sensible price and terms which are good for our customers.
* All inflatable boats go through quality check and control before they are shipped from China. We provide necessary builder’s certificates and documentation for the customer to register the inflatable boats in Hong Kong or any where else. The factories also ensure that quality materials are used in manufacturing which adhere to high standards. Although we don’t provide any official warranty but we normally provide any needed spare parts to our customers under reasonable circumstances.